Minka Lavery 6962-284 Instruction Manual download pdf

INSTALLATION INSTRUCTIONS FOR FIXTURE 6962

MOUNTING THE FIXTURE

1. Shut off the power at the fuse box or circuit breaker. If

necessary, remove the old fixture from wall including

the mounting hardware.

2. Carefully remove the new fixture from the carton and

check that all parts are included as shown in the

illustration.

3. Thread the nipple (C) into the mounting strap (A).

4. Place the washer (F) over the nipple protruding

through the mounting strap and thread lock nut (E)

tightly onto nipple (C).

5. Attach the mounting strap (A) to the outlet box using

the outlet box screws (B). The side of the mounting

plate marked “GND” must face out.

6. Follow the wiring instructions carefully (See Fig.2).

7. Attach the fixture back plate (L) over the mounting

strap (A) allowing the nipple (C) to protrude through

the center hole of the back plate (L). Then secure with

hex nut (M) and finial (K).

8. Place the glass shade (I), and cushion ring (H) over

the socket (J) and secure with socket ring (G).

9. Install the bulbs in accordance with fixture’s

specifications. (DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!).

Wiring (See fig.2)

1. At this point, connect the electrical wires as shown

in Fig. 2, making sure that all wire connectors are

secured. If your outlet box has a ground wire (green

or bare copper), connect the fixture’s ground wire to it.

Otherwise, connect the fixture’s ground wire directly to

the mounting strap using the green screw provided.

2. Tuck the wire connections neatly into the wall junction

box.

Your installation is now complete. Return power to the

outlet box and test the fixture.

Fig.2

Fig.1

Socket Ring#SKT-RING-26

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Set A#A-010

-Crossbar

-Ground screw

-Mounting screws (2)

Summary of Contents

Page 1 - -Mounting screws (2)

INSTALLATION INSTRUCTIONS FOR FIXTURE 6962MOUNTING THE FIXTURE1. Shut off the power at the fuse box or circuit breaker. Ifnecessary, remove the old fi

Comments to this Manuals

No comments

Minka Lavery 6962-284 Instruction Manual

Browse online or download Instruction Manual for Unknown Minka Lavery 6962-284. Minka Lavery 6962-284 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Minka Lavery 6962-284