Minka Lavery 4133-84 Instruction Manual download pdf

INSTALLATION INSTRUCTIONS For 4133

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

READ AND SAVE THESE INSTRUCTIONS

Fig.1

CAUTION-RISK OF FIRE. CONSULT A QUALIFIED

ELECTRICIAN TO ENSURE CORRECT BRANCH

CIRCUIT CONDUCTOR. MIN 90˚C SUPPLY

CONDUCTORS.

MOUNTING THE FIXTURE (Fig. 1)

1. Shut off the power at the fuse box or circuit breaker.

If necessary, remove the old fixture including the

mounting hardware.

2. Carefully remove the new fixture from the carton and

check that al parts are included as shown in the

illustration.

3. Thread the two mounting screws (A) (Size:#8-

32*1.4”L) part way into the crossbar (B).

4. Secure the crossbar (B) to the junction box using the

junction box screws (C) (Size:#8-32*0.6”L). The side

of the crossbar marked “GND” must face out.

CONNECTING THE WIRES (Fig. 2)

5. At this point, connect the electrical wires as shown in

Fig. 2, making sure that all wire connectors are

secured. If your outlet box has a ground wire (green

or bare copper), connect the fixture’s ground wire to

it. Otherwise, connect the fixture’s ground wire

directly to the mounting plate using the green screw

provided. After the wires are connected, tuck them

carefully inside the outlet box.

COMPLETING THE INSTALLATION (Fig. 1)

6. Raise the fixture body (D) allowing for the mounting

screws (A) to protrude through the holes on the

fixture body (D), then secure with the finials (E).

7. Install the light bulbs (Included) in accordance with

the fixture’s specifications. (DO NOT EXCEED THE

MAXIMUM WATTAGE!) (NE PAS DEPASSER LA

PUISSANCE NOMINALE MAXIMALE!).

8. Thread the rod (G) into the coupling (F).

9. Slide the wire netting (H) onto the rod (G), then

secure with the finial (I).

Your installation is now complete. Return power to

the junction box and test the fixture.

Fig.2

Set#

-Crossbar

-Ground screw

-Mounting screws*2

-Junction box screws*2

A-016

Summary of Contents

Page 1

INSTALLATION INSTRUCTIONS For 4133WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES

Comments to this Manuals

No comments

Minka Lavery 4133-84 Instruction Manual

Browse online or download Instruction Manual for Unknown Minka Lavery 4133-84. Minka Lavery 4133-84 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Minka Lavery 4133-84