Minka Lavery 6951-267B Instruction Manual Page 1

Browse online or download Instruction Manual for Unknown Minka Lavery 6951-267B. Minka Lavery 6951-267B Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
INSTALLATION INSTRUCTION FOR 6951
For Wall Mount Light Fixtures
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
READ AND SAVE THESE INSTRUCTIONS
Fig.1
PREPARATION
1. Shut off the power at the circuit breaker and
remove the old fixture, including the mounting
hardware.
2. Carefully remove the fixture from the carton and
check that all parts are included as shown in the
illustration.
MOUNTING THE FIXTURE (Fig.1)
3. Secure circular strap (A) to outlet box with the
junction box screws (B) (Size: #8-32*0.6”L)
through the slotted holes in the circular strap (A).
The side of the circular strap (A) marked “GND”
must face out.
CONNECTING THE WIRES (Fig. 2)
4. At this point, connect the electrical wires as shown
in Fig. 2 making sure all wire connectors are
secured. If your outlet box has a ground wire
(green or bare copper) connect fixture’s ground
wire to it. Other wise, connect the fixture’s
ground wire directly to the mounting plate using
the green screw provided. After the wires are
connected, tuck them neatly inside the junction
box.
COMPLETING THE INSTALLATION
5. Mount the fixture body (D) to the circular strap (A),
and then secure with the mounting screws (C)
(Size: #8-32*0.5”L).
6. Place the glass (F) and the cup (G) over the
socket (E), then secure with the socket ring (H)
with the wrench (I) provided.
7. Install the light bulb in accordance with the
fixture’s specifications (DO NOT EXCEED THE
MAXIMUM WATTAGE!) (NE PAS DEPASSER
LA PUISSANCE NOMINALE MAXIMALE!)
Your installation is now complete. Return the power
to the junction box and test the fixture.
WRH-T1-51
Set# A-020-117
-Circular strap
-Ground screw
-Mounting screw*2
-Junction box screw*2
Fig.2
SKT-RING-26
Page view 0
1

Summary of Contents

Page 1 - For Wall Mount Light Fixtures

INSTALLATION INSTRUCTION FOR 6951For Wall Mount Light FixturesWARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .AVERTISSEMENT! COUPER LE COU

Comments to this Manuals

No comments