Minka Lavery 971-138 Instruction Manual download pdf (Page 1)

INSTALLATION INSTRUCTIONS

For Model 970-1-138

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Fig. 1

Fig. 2

MOUNTING THE BACKPLATE(Fig.1)

1. Shut off the power at the circuit breaker and remove old

fixture, including the crossbar.

2. Carefully unpack your new fixture and lay out all the parts on

a clear area. Take care not to lose any small parts necessary

for installation.

3. Attach the crossbar (A) to the outlet box using two outlet Box

Screws (B). The side of the Crossbar marked “GND” must face

out.

4. Thread the nipple (C) part way into the center hole of the

crossbar.

CONNECTING THE WIRES (Fig. 2)

1. At the point, connect the electrical wires as follows, Connect

the black wire from the fixture to the black house (hot) wire.

Connect the white wire from the fixture to the white (neutral)

house wire. Make sure all wire nuts are secured. You may

wrap the connections with electrical tape. If your outlet has a

ground wire (green or bare copper)connect fixture’s ground

wire to it. Otherwise connect fixture’s ground wire directly to

the crossbar using the green screw provided.

MOUNTING FIXTURE AND SHADE

1. After the wires are connected tuck them carefully inside the

outlet box as you place the Backplate (F) over the nipple (C).

Secure the Backplate (F) against the wall using Knurled Cap

(D).

2. Install glass shade (E) by referring to fig 1.

3. Install light bulbs in accordance with fixtures specifications, DO

NOT EXCEED MAXIMUM WATTAGE RATING!

Your installation is now complete. Return power to the

junction box and test the fixture.

FIXTURE

WIRES

Black or

Smooth

USE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

USE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

USE

WIRES

Green or

Bare

Copper(Gr

ound)

MIN 90℃ SUPPLY CONDUCTORS

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS For Model 970-1-138 WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. Fig. 1 Fig. 2 MOUNTING THE BACKPLATE(Fi

Comments to this Manuals

No comments

Minka Lavery 971-138 Instruction Manual Page 1

Browse online or download Instruction Manual for Unknown Minka Lavery 971-138. Minka Lavery 971-138 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Minka Lavery 971-138 Instruction Manual Page 1

Browse online or download Instruction Manual for Unknown Minka Lavery 971-138. Minka Lavery 971-138 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Minka Lavery 971-138