Minka Lavery 8847-94 Installation Guide download pdf

INSTALLATION INSTRUCTIONS

Model # 8847/8997

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Shut off power at the circuit breaker and remove old

fixture including mounting hardware.

Carefully unpack your new fixture and lay out all the

parts i

n a clear area. Take care not to misplace any

small parts necessary for installation.

Pull black and white wires out of electrical outlet box

(A).

4. Thread the two studs (B) into the pre-

drilled holes in

the circular strap (C) spaced the same distance

apart as the holes in the back plate (H),

then tighten

with the nut (E).

5. Attach Circular Strap (C) using Outlet

Box Screws

(F) to the outlet box (A), (Fig 1).

Connect the electrical wires as shown in Fig.2.

aking sure that all wire connectors are secured. If

your outlet box

has a ground wire (green or bare

copper), connect the fixture ’s Ground wire to it.

Otherwise, connect the fixture’s Gr

ound wire directly

to the circular strap

using the Green Screw (D)

provided.

To prevent moisture from entering the outlet box (A)

and causing a short, use clear silicone Sealant to

outline the outside of fixture back plate (H) where it

meets the wall leaving a space at bottom to allow

moisture a means to escape.

8. Place the back plate (H) into stud (B) and secure it

tightly against the wall using cap nut (G). (Fig 1)

9. At this point, unscrew the screws (I), remove the

cage (J) with the shade to install the light bulbs in

accordance with the fixture specification —DO NOT

EXCEED THE MAXIMUM WATTAGE RATING!

10.

Replace the cage (J) with the shade, secure with the

screws (I).

Your installation is now complete. Return power to the

outlet box and test the fixture.

Fig. 1

BARE COPPER(GROUND)

Fig.2

FIXTURE

WIRES

WHITE

BLACK

(HOT)

WIRES

HOUSE

GREEN OR

WHITE

(NEUTRAL)

WIRES

HOUSE

(GROUND)

COPPER

BARE

FIXTURE

WIRES

BLACK

WIRES

FIXTURE

GREEN OR

HOUSE

WIRES

“CAUTION

RISK OF FIRE CONSULT A

QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR”

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Model # 8847/8997 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. 1. Shut o

Comments to this Manuals

No comments

Minka Lavery 8847-94 Installation Guide

Browse online or download Installation Guide for Unknown Minka Lavery 8847-94. Minka Lavery 8847-94 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Minka Lavery 8847-94