Minka Lavery 8790-161 Installation Guide download pdf

INSTALLATION INSTRUCTIONS

Model # 8790

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

1. Shut off power at the circuit breaker and remove old

fixture including mounting hardware.

2. Carefully unpack your new fixture and lay out all the

parts in a clear area. Take care not to misplace any

small parts necessary for installation.

3. Pull black and white wires out of electrical outlet box

(A).

4. Thread the two studs (B) into the pre-drilled holes in

the circular strap (C) spaced the same distance

apart as the holes in the back plate (H), then tighten

with the nut (E).

5. Attach Circular Strap (C) using Outlet Box Screws

(F) to the outlet box (A), (Fig 1).

6. Connect the electrical wires as shown in Fig.2.

Making sure that all wire connectors are secured. If

your outlet box has a ground wire (green or bare

copper), connect the fixture’s Ground wire to it.

Otherwise, connect the fixture’s Ground wire directly

to the circular strap using the Green Screw (D)

provided.

7. To prevent moisture from entering the outlet box (A)

and causing a short, use clear silicone Sealant to

outline the outside of fixture back plate (H) where it

meets the wall leaving a space at bottom to allow

moisture a means to escape.

8. Place the back plate (H) into stud (B) and secure it

tightly against the wall using cap nut (G). (Fig 1)

9. At this point, install 1*100W/E26/A bulb (no bulb

included) from bottom directly in accordance with

the fixture specification. --DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!

(NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!)

Your installation is now complete. Return power to the

outlet box and test the fixture.

Fig. 1

B A R E C OP P E R ( GR OU ND )

Fig.2

FI XTURE

WIRES

WHI T E

BLACK

(HOT)

WIRES

HOUSE

GREEN OR

WHI T E

(NEUTRAL)

WIRES

HOUSE

( GROUND)

COPPER

BARE

FI XTURE

WIRES

BL ACK

WIRES

FI XTURE

GRE E N OR

HOUSE

WIRES

“CAUTION-RISK OF FIRE CONSULT A

QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR”

ATTENTION – RISQUE D’INCENDIE, CONSULTER UN

ÉLECTRICIEN QUALIFIÉ POUR VOUS ASSURER QUE

LES CONDUCTEURS DE LA DÉRIVATION SONT

ADÉQUATS.

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Model # 8790 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. AVERTISSEMENT! COUPER LE C

Comments to this Manuals

No comments

Minka Lavery 8790-161 Installation Guide

Browse online or download Installation Guide for Unknown Minka Lavery 8790-161. Minka Lavery 8790-161 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Minka Lavery 8790-161