Minka Lavery 1567-477 Installation Guide download pdf (Page 1)

INSTALLATION INSTRUCTION 1567-477

For Flush Mount Ceiling Fixtures

U.S. Patent No.: D531, 345

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

Fig.1

Fig.2

MOUNTING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker box. Remove old

fixture and all hardware from Junction Box.

2. Carefully unpack your new fixture and lay out all the parts

on a clear area. Take care not to lose any small parts

necessary for installation.

3. Thread the two Studs (A) about 1/4”into the pre-drilled

holes in the Mounting strap spaced the same distance apart

as the holes in the fixture (B).

4. Attach the Mounting strap to the Junction Box with the two

Junction Box Screws as shown. The side of the Mounting

strap marked "GND" must face out.

5. While holding the column assembly towards the ceiling,

connect the electrical wires as Shown in Fig.2, making

sure that all wire nuts are secured. You may have to wrap

the connections with electrical tape. If your outlet has a

ground wire (green or bare copper), connect the fixture

ground wire to it. Otherwise connect fixture’s ground wire

directly to the Mounting strap with the green screw

provided. After wires are connected, tuck them carefully

inside the Junction Box.

6. Put lamp body (B) on to the junction box, aligning screws

on mounting strap with mounting holes in canopy and lock

it securely with ball nut (C).

7. Install the light bulbs in accordance with the fixture’s

specifications. NOTE: DO NOT EXCEED THE

SPECIFIED WATTAGE.

8. Thread pipe (E) into the nipple bottom of lamp body (B),

then fix it tightly with hex nut (D).

9. Put glass shade (F) onto the lamp body (B), protrude the

pipe (E) from the hole of the glass shade, and then screw it

with the brass nut (G).

10. Attach finial base (H) to the end of pipe (E) and tighten

firmly with the finial (I).

Your installation is now complete. Return power to the

junction box and test the fixture.

White or

HOUSE

Black

WIRES

(Hot)

Smooth

FIXTURE

WIRES

Black or

Ribbed

WIRES

FIXTURE

Bare Copper(Ground)

FIXTURE

WIRES

Copper

(Ground)

HOUSE

(Neutral)

WIRES

White

Bare

Green or

WIRES

HOUSE

MOUNTING THE FIXTURE (Fig.1) 1

Summary of Contents

Page 1 - MOUNTING THE FIXTURE (Fig.1)

INSTALLATION INSTRUCTION 1567-477 For Flush Mount Ceiling Fixtures U.S. Patent No.: D531, 345 WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT

Comments to this Manuals

No comments

Minka Lavery 1567-477 Installation Guide Page 1

Browse online or download Installation Guide for Unknown Minka Lavery 1567-477. Minka Lavery 1567-477 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Minka Lavery 1567-477 Installation Guide Page 1

Browse online or download Installation Guide for Unknown Minka Lavery 1567-477. Minka Lavery 1567-477 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Minka Lavery 1567-477